Rules for Readability

First published in Cook Partners, July/August 2008. By CCMI Staff.

Before desktop publishing, designers deliberately drafted each new typeface for a set purpose. For example, Times Roman was created for easy reading in newspapers and magazines. Those who worked in the graphics industry knew the function of each new style.

Today this is no longer true. People who never studied typography are making typographical decisions on the computer. As a result, display type is often used in text, or several different fonts are used in the same article, making it hard to read.

What has been lost is a knowledge of the factors that go into good type decisions—typeface, size and spacing to name only a few. Following are some questions to get you thinking in this direction.

What is the purpose?

The first factor we must define continually is: What is the purpose of the typography in each section of the publication? Is it to catch the attention of the reader or to convey the message effectively?

If the purpose is to catch attention—for example, in headlines—then the next question is: how will this be accomplished? Options include a decorative typeface or perhaps a larger size or variation (bold or italics) of a standard style.

Now the question becomes: How can we effectively communicate a message? Type that draws too much attention to itself prevents a reader from absorbing its message. Correct body text should go almost unnoticed. If anything, it should seem “pleasant” to readers, drawing them into the text, then allowing them to focus on the message.

What will help my readers?

After you have identified the purpose of each type element, factor in audience characteristics:

How old are my average readers? Studies show that readers under the age of 14 and over the age of 40 prefer type that is 11 points or larger. Readers between those two age groups can comfortably read text that is somewhat smaller. As a rule, the number of readers who finish an article decreases as the point size of type becomes smaller.

What is my audience’s average reading ability? Inexperienced or new readers, no matter what age, will appreciate type that is 12–14 points. Extra leading, or the spacing between lines, also helps. A good rule to follow is: the lower the reading level, the larger the type needs to be.

What type of fonts are my readers accustomed to? Reading is directly related to letter and word recognition. As a result, readers will say that familiar-looking type is “easier to read” than other kinds. For example in America, serif typestyles are considered more readable, which is why they are almost always chosen for body text. Sans serifs are reserved for headlines and other kinds of display type.

In some parts of Europe, these trends are opposite. There, the most common typefaces tend to be sans serifs. Which fonts are widely used by the schools, newspapers and magazines in your country?

What about special effects?

Next, address specific concerns.

What about using all capital letters for emphasis? This technique works best in a title, but only if it is extremely short. Capital letters do grab readers’ attention, but they are difficult to read.

What about using different kinds of paper? Many typestyles—especially in small sizes—do not print well on certain kinds of paper. It is always wise to run a sample that shows how different typestyles and sizes look on the selected stock.

What about colored type? Again, it is important to test samples first. A single color can take on different hues depending on the weight and texture of the stock it is printed on. Colored letters that provide low contrast with the background will also be difficult to read.

What about column width? A general rule is: the smaller the type size, the narrower the column should be. Since new, or young, readers need larger type, longer lines can be effective. If, for some reason, designers must use wide columns for smaller type, extra leading can help.

After you have considered these factors and made your decisions, it is vital to have others review drafts of the finished layouts. Are they eye-catching in the right places and “comfortable” where comprehension counts? In short, are they readable?

Varied styles within a type family are usually based on changes in the density or width of letter forms.

  • Light: a thinner version of the regular typeface.
  • Regular, Book, Medium: versions appropriate for body text.
  • Demi, Bold, Black: progressively thicker versions.
  • Condensed, Compressed: narrower, squeezed versions.
  • Extended, Expanded: a wider version.

© 2008 Cook International. Presented courtesy of David C. Cook.

« Back to Publishing Resources